Home > Products > PDH > ZYEQ-ELAN800+/ELAN820
 

Relative link

ZYTR-(F) E1/V.35
ZYTR-OP/V.35
ZYTR-10BaseT/(F) E1
ZYEQ-svpe-10/100M-4E1
ZYTR-10BaseT/OP
ZYTR-MPC
ZY-LANCON Series
  ZYEQ-ELAN800+/ELAN820
 
ELAN800+_FACE
 
 
 
ELAN800+_BACK
 
 
 
ELAN820
 

    INTRODUCTION

 
ZYEQ -ELAN800+
 

ZYEQ-ELAN800+ is a fiber optical multiplexer based on the highly integrated VLSI put forward by BJZY Co.Ltd. ZYEQ-ELAN800+ has the maximum capacity of 16 E1 channels but the most unique character is its built-in protocol converters with which V.35 data or Ethernet signal can also be transported through each E1 channel. This device perform with high availability, reliability and flexibility , etc. These features make ZYEQ-ELAN800+ the ideal equipment for building small or medium scale communication network and private network. Using standard 19" 1U rack, this product is small and light, and can be installed easily.

 
ZYEQ -ELAN820
 
 

Based on normal ZYEQ-ELAN800+, adds another S optical port to provide a 1+1 protection to multiplex line, ZYEQ-ELAN800+ is a fiber optical multiplexer which has the maximum capacity of 16 E1 channels but the most unique character is its built-in protocol converters with which V.35 data or Ethernet signal can also be transported through each E1 channel. This device performs with high availability, reliability and flexibility , etc. These features make ZYEQ-ELAN820 the ideal equipment for building small or medium scale communication network and private network. Using standard 19" 1U rack, this product is small and light, and can be installed easily.

 

 

    MAIN FEATURES

 
ZYEQ -ELAN800+
 

10 E1 Interface s.
 

Every E1 channel can be mounted a V.35 conversion card then, become a n x 64K V.35 interface.
 

3 RS232 channels, data rate below 9.6 Kb/s.
 

Indicate the alarm states of the local and remote end.
 

Local or remote network management interface.
 

Optional power supply: DC -48V or AC 220V
 
ZYEQ -ELAN820
 

Dual S optical ports hot standby, cut over when F-3 alarm detected on the working port.
 

10 G.703 E1 Interface s.
 

Every E1 channel can be mounted a V.35 conversion card then, become a n x 64K V.35 interface.
 

3 RS232 channels, data rate below 9.6 Kb/s.
 

Indicate the alarm states of the local and remote end.
 

Local or remote network management interface.
 

Optional power supply: DC -48V or AC 220V
 
 

    SPECIFICATIONS

 
ZYEQ -ELAN800+
 

I S optic port:
 
 

    Code pattern: CMI

 
 

    Code Rate: 33.79Mb/s

 
 

    Transmit Optical Power:
        LD, >= -10dBm

 
 

    Receive Sensitivity: <= -38dBm

 
 

    Optic Fiber connector:
        FC/SC model

 
 

    Optical Fiber: SM 1.3um

 

10 G.703 ports: BNC, 75/120 ohm
 

V.35 port: DB15 optional
 

Ethernet 10BaseT port: RJ45 optional
 

3 RS-232C interface: RJ45

 

Dimension: 483× 210 × 45 ( mm)

 

Power supply:
 
 

     -48Vdc, DC range:
        -36Vd c ~ - 72Vdc

 
 

    Or 220 Vac, AC range:
        180V ~ 260V

 

Ripple: Vpp <= 240mV

 

Consumption <=12W

 
ZYEQ -ELAN820
 

2 S optical port:
 
 

    Code pattern: CMI

 
 

    Code Rate: 33.79Mb/s

 
 

    Transmit Optical Power:
        LD, >= -10dBm

 
 

    Receive Sensitivity: <= -38dBm

 
 

    Optic Fiber connector:
        FC/SC model

 
 

    Optical Fiber: SM 1.3um

 

10 G.703 ports: BNC, 75/120 ohm
 

V.35 port: DB15 optional
 

Ethernet 10BaseT port: RJ45 optional
 

3 RS-232C interface: RJ45

 

Dimension: 483× 210 × 45 ( mm)

 

Power supply:
 
 

     -48Vdc, DC range:
        -36Vd c ~ - 72Vdc

 
 

    Or 220 Vac, AC range:
        180V ~ 260V

 

Ripple: Vpp <= 240mV

 

Consumption <=12W

 
 
© 2005 Zhengyou Company, Inc. All rights reserved.
E-mail:webmaster@zhengyou.com Tel :010-62362919