Home > Products > Protocol Converter Series > ZYTR-10BaseT/(F)E1
 

Relative link

Protocol Converter Series
ZYEQ-OP/E1
ZYEQ-svpe-10/100M-4E1
ZYTR-OP/V.35
ZYTR-10BaseT/OP
ZYTR-MPC
ZY-LANCON Series
ZYTR- E1_V.35/ZYTR-FE1_V.35
  ZYTR-10BaseT/(F)E1
 
ZYTR-10BaseT/E1
 
 
 
 
ZYTR-10BaseT/FE1
 

    INTRODUCTION

 
ZYTR-10BaseT/E1
 

ZYTR-10BaseT/E1 is a high performance self-study Ethernet- bridge. Being low-cost and compact size, it is very suitable for the low-cost bridge application. It also can be used as a LAN extender and support super length data frame transmission. ZYTR-10BaseT/E1 transmits Ethernet data through a E1 channel from one Ethernet LAN to another place . All the interfaces comply with the public standard.

 
ZYTR-10BaseT/FE1
 
 

ZYTR-10BaseT/FE1(V) is a high performance self-study Ethernet- bridge. Being low-cost and compact size, it is very suitable for the low-cost bridge application. It also can be used as a LAN extender and support super length data frame transmission. ZYTR-10BaseT/FE1(V) transmit Ethernet data through a E1 channel from one Ethernet LAN to another and control the time slot selection. All the interfaces comply to the public standard.

 

 

    MAIN FEATURES

 
ZYTR-10BaseT/E1
 

Use 10000 MAC address LAN table and support transparent transmission of super length data frame.
 

1 full E1 Channel for transmission of Ethernet data.
 

 

 
 

Inner optional power supply of AC220V and DC-48V.
 

RJ-45 UTP interface is fully compatible with IEEE 802.3/ Ethernet V.2.
 

2 UTP interfaces which separately connect to PC Ethernet card and HUB (no simultaneously).
 

 Filtering and forwarding rate :15000 frames/second.
 

1 G.703 E1 interface: BNC-75Ohm or RJ-45- 120Ohm optional.
 

Dimension: 220 x 140 x 39 (mm).
 
ZYTR-10BaseT/FE1
 

Use 10000 MAC address LAN table and support transparent transmission of super length data frame.
 

1 framed mode E1 Channel for transmission of Ethernet data.
 

And can choose arbitrary time slot.
 

Inner optional power supply of AC220V and DC-48V.
 

RJ-45 UTP interface is fully compatible with IEEE 802.3/ Ethernet V.2.
 

2 UTP interfaces which separately connect to PC Ethernet card and HUB (no simultaneously).
 

Filtering and forwarding rate :15000 frames/second.
 

1 G.703 E1 interface: BNC-75Ohm or RJ-45- 120Ohm optional.
 

Dimension: 220 x 140 x 39 (mm).
 
 
© 2005 Zhengyou Company, Inc. All rights reserved.
E-mail:webmaster@zhengyou.com Tel :010-62362919